Processor

Processor

Click here for instructions on how to setup your Processor.

Configuration page

To access the Processor's configuration page, just enter your Processor's IP in a Chrome web browser.

http://<processor ip>

Interactive page

To access the Processor's interactive page, just enter your Processor's IP with port 8889 in a Chrome web browser.

http://<processor ip>:8889

Log page

To access the Processor's log page, use the Chrome web browser and enter the follow. Make sure to use your Processor's correct IP address.

http://<processor ip>:8888/log

TCP Protocol

The Processors loads, scenes and virtual keypads can also be called programmatically with with TCP commands. For more information about this, see section Integration Protocol.

SD Card Replacement

Some Processor may have there internal SD cards break down and need to be replaced. This is by no means normal. If this happens to you, please contact us right away and we will send you a replacement sd card right away.

The picture below show's an example of where the SD card is located once you open the Processor.

To replace the SD card, simply pull out the old one. Then insert the new SD card in the same slot. Make sure the pins of the SD card face the pcb board.

Card Replacement Location

Last Updated: 10/5/2018, 3:00:16 PM